Impact Lab


Subscribe Now to Our Free Email Newsletter
August 6th, 2014 at 11:13 am

3D printing breakthrough allows several different metals within one print

print-metal-3d-printing

Image of the LD process fabricating several test specimens.

It’s amazing how quickly additive manufacturing technology has been progressing. Laser sintering of metals within the manufacturing industry was a process used by only a few companies, mostly in a research capacity, just a few years ago. Now numerous companies are using laser sintering additive manufacturing machines to print extremely important metal components for a variety of products, from airliners to race cars.

IL-Header-Communicating-with-the-Future

 

In many cases, additive manufacturing of metal components is cheaper, and produces a sturdier, lighter product than traditional manufacturing techniques. Based on this alone, you would think that there would soon be widespread adoption of the technology from medium to large cap companies around the globe. That’s not all though.  The future of the technology looks extremely bright, placing it leaps and bounds ahead of that of traditional methods, and enabling the manufacturing of parts which were nearly impossible just a couple of years ago.

A recent accomplishment by researchers at NASA’s Jet Propulsion Laboratory, the California Institute of Technology, Pasadena, and Pennsylvania State University, University Park, could have staggering implications for manufacturing in general, over the coming years. What they have managed to do, is figure out a way in which a part can be 3D printed out of several different metal alloys. For instance, a jet engine component could be printed in one piece with several different properties throughout. The area of the part which directly makes contact with a heat source, could consist of a metal alloy which can stand up to higher temperatures, while the opposite side of that part could consist of a metal with less temperature resistance, but be lighter, stronger and less dense, to cut back on weight.

“You can have a continuous transition from alloy to alloy to alloy, and you can study a wide range of potential alloys,” said R. Peter Dillon, a technologist at JPL. “We think it’s going to change materials research in the future.”

The actual printing process is foreign to anything we have seen in the past. Instead of depositing metal or sintering a bed of metal powder layer-by-layer, like other additive manufacturing methods, the researchers created a printer which deposited the metal via a sintering technique on a rotating rod, meaning that the inside of a part could consist of a different metal alloy than the outside, or there could even be several different metals within a part. The actual head of the printer features 4 powder blowers, allowing for multiple metals to be melted via a laser, without the need to change out the metal type, making the process a smooth and uninterrupted one.

“We’re taking a standard 3-D printing process and combining the ability to change the metal powder that the part is being built with on the fly,” said Douglas Hofmann, a researcher in material science and metallurgy at JPL, and visiting associate at Caltech. “You can constantly be changing the composition of the material.”

The implications of this research could have a far reaching impact on the manufacturing industry, allowing for the combination of multiple metal materials with multiple properties, all printed in one piece, without the need for welding, screws, or bolts. This could be one of the more important pieces of research within the additive manufacturing space this year.

Via 3DPrint.com

 

IL-Header-Communicating-with-the-Future

Comments are closed.

Futurist Speaker